Tips For Getting Rid Of Mold On Your Siding Without A Pressure Washer

If you go online and look for instructions on how to do something, sometimes the professionals will give advice that involves tools that you might not own and probably don't want to buy to just use once. You might have a simple problem, like smelly and ugly mold on your siding. You might see that there are a lot of articles about how easy that mold is to remove with a pressure washer, but you don't have one. Here are some tips for cleaning the mold off of your siding without a pressure washer.

1. Try Bleach

Your first step is to try bleach. Bleach is an excellent choice for getting rid of most types of mold due to the fact that it will make the surface inhospitable for the mold for a decent length of time. In order to use bleach, you will need to make a potent solution. Take a bucket and put a gallon of water into it. Then add a quart of liquid bleach. For additional cleaning power, consider adding powdered laundry detergent or even baking soda. This will help loosen the mold more quickly. Mix the solution thoroughly.

Once you have the solution prepared, take your ordinary garden hose and place one end into the bucket. Use the other end to propel the solution onto the mold of your siding. If you are having a hard time getting the stream all the way up to the upper parts of your siding, you might need to use a standard nozzle that you likely already have on hand. Once your siding is covered with the solution, allow it to sit on your siding for between 5 and 15 minutes. Then, use water to rinse off the solution.

2. Try Vinegar

If you are worried about your kids being harmed by the bleach solution or if you want to be more environmentally friendly, consider using vinegar. In this case, you will need to mix a solution of about three cups of vinegar for every seven cups of water. Take a smaller bowl and put some of the solution that you mixed into it. Then, mix enough baking soda into that smaller bowl that the mixture is kind of thick and gritty. Take a scrub brush and start scrubbing your siding where the mold can be found. Use a long-handled brush to reach the higher parts of your siding.

For more information, talk to a company that specializes in removing mold from siding. Click here for more info about the subject.


Share