Three Problems That Cause Well Pumps To Fail And How To Prevent Them

If you rely on a well for water in your home, well maintenance is important. When your well equipment fails, then you will have to go without potable water. Knowing what type of problems could cause your well pump to fail could prevent these problems and save you money on repairs. Here are some of the problems that cause well pumps to fail and what you can do to prevent them:

1. Submersible Wells and Problems with Electrical Wire Damage

The well for your home may have a submersible pump, which means that it is located inside the well casing. Submersible pumps are good because they are protected from the elements and out of the way. The most common problem with a submersible pump is wiring that gets twisted and damaged after years of operating the pump. To prevent this, make sure that the wires get securely attached to the pipe of the pump when it is pulled; the less movement of the wiring, the less likely that it is to be damaged.

2. Pressure Tanks and The Valves Inside Going Bad

To give your household plumbing water pressure, the well has a pressure tank installed. This is a tank with a valve inside that prevents the pump from constantly running. Eventually, the valve inside the tank will wear out and need to be replaced because it is usually made from rubber that wears after years of use. If your plumbing is making noises when you turn the water on or the pump is constantly running, this is a likely cause of the problem. There is not much you can do to prevent this except to have a well maintenance service routinely check your equipment for these types of problems.

3. Buildup and Wear of Parts On Old Well Pumps That Need Replacing

After years of providing water to your home, parts on your well pump will eventually wear out and need to be replaced. If you have a well service routinely do maintenance, they can also clean the pump when it is pulled from the well to help reduce wear. Eventually, you will need to replace the pump, especially if it is an older, less efficient one.

These are some of the problems that could cause your well pump to fail and what you can do to prevent the problems. If your well equipment is not working properly, contact a well pump repair service, such as Hull Well & Pump Service, to help with repairs and keep the water running in your home.